Is a Self Cleaning Pool Worth It?

Thanks to technology, there are now pool cleaning systems that make swimming pool owners’ lives easier. The self cleaning pool system is now sold as an option to the classic pool floor cleaner that rolls around and vacuums debris. But is a self cleaning pool worth it? Which of these two pool cleaner systems is better? Learn about different pool cleaning systems and get the best of your pool during summer.

Self Cleaning Pool System: In Floor Pool Cleaning System

The in floor pool cleaning system includes pop-up heads that rise and spray in sequence. Also, the water flow is changed by a distribution device across jet banks in the steps and pool floor. They direct debris towards the deep end to finally be sucked by the drains and skimmers.

Pros

If you cannot stand seeing any kind of clutter, this system is right for you. As it does not use any hoses or equipment, it is basically “invisible”. Moreover, due to its outstanding improvement of the circulation, it mixes heat and chemicals throughout the pool.

Cons

The main downside found with this self cleaning pool system is that it might not get all debris. However, this situation will not be an issue for pools with automatic covers or without nearby trees. On the other hand, the installation of an in floor pool cleaning system is considerably expensive, which can be a drawback for many owners.

How It Works

Although they are mainly installed on concrete pools, in floor pool cleaning systems are also a good option for vinyl pools. This system includes 15 to 25 pop-up heads secured into the pool shell, while pipes run from the distribution manifold to 4-6 banks of pop-up heads on the floor. The newest models also have a pair of drain traps in the pool’s deep end that is plumbed to a leaf trap cylinder under a skimmer lid. To empty the debris, reach in and pull out the long basket.

Self Cleaning Pool System: On Floor Pool Cleaner

Pros

In just a few hours, automatic pool cleaners can efficiently clean a pool getting most leaves and debris. The installation of these suction cleaners only takes a few minutes, and they can be used in almost any type and size of the pool, even after swimming pool remodeling. The pressure cleaners that include a separate booster pump can operate automatically, only requiring occasional cleaning of their debris bag. Furthermore, robotic pool filters improve the water circulation and filter water while they vacuum the pool.

Cons

Unfortunately, the downsides of these pool cleaners are several. For instance, it is needed to clean the bag and servicing. Unlike an in floor cleaner, an automatic pool cleaner will require more repair and maintenance. Approximately, every 5 to 10 years a replacement or extensive repair will be required.

How It Works

Robotic, pressure, and suction pool cleaners work differently. Robotic cleaners use a drive motor to power the wheels and a pump motor to draw water and debris to the filter bag. On the other hand, pressure cleaners pump water with a booster pump to use its power and be able to move around the swimming pool. Moreover, water is used to create suction for vacuuming. When it comes to suction cleaners, these are attached to a suction port like the pool skimmer and use a pulse device to create a temporary blockage of suction, causing the cleaner to bounce all around the swimming pool.

Conclusion

Regardless of their disadvantages, all pool cleaner systems are highly convenient once you have decided it is worth it to install a pool. If you have decided to get an in floor pool cleaning system, make sure to get it while building your swimming pool. Otherwise, it would be too late to get that system and you will need an on floor cleaning system.